- Connector Types:
- End A: SC/APC ferrule housing snapped on after pull-through
- End B: SC/APC, LC, Optitap®
- Fiber Type: Single-mode (OS2), Bend-Insensitive (G.657.A2 or G.657.B3)
- Cable Jacket Diameter: 3.0mm
- Jacket Color: Black or White
- Testing: 100% optically tested for insertion loss and return loss
- Insertion Loss: ≤ 0.3 dB
- Return Loss: ≥ 60 dB
Pullable Fiber Cables
Product Overview
NetSource’s Pullable Fiber Drop Cable Assemblies are purpose-built for clean and secure installations in fiber-to-the-home (FTTH) and fiber-to-the-premises (FTTP) networks. Each assembly comes factory-terminated with an SC/APC ferrule and a threaded pull cap that screws onto the connector for protection during installation. The entire assembly is designed to be pulled through a wall, conduit, or microduct using the pull cap—ensuring the ferrule is shielded and the cable is routed without damage.
Once the assembly is pulled through the wall or duct, the pull cap is removed, and the SC/APC housing is snapped into place—no splicing, polishing, or field termination required. Built with bend-insensitive single-mode fiber (G.657.A2 or G.657.B3), this 3.0mm cable handles tight routing paths with ease. Assemblies are made to order and available in black or white jacket options to suit indoor or outdoor installations.
- Product Specifications
- Environmental and Mechanical Properties
- Features and Benefits
- Media Downloads
- Operating Temperature: -20°C to 70°C (-4°F to 158°F)
- Minimum Bend Radius:
- 5mm (G.657.A2)
- 7mm (G.657.B3)
- Standards Compliance: RoHS, REACH, GR-20, GR-326, and Telcordia
- Cable: Ruggedized 3MM Indoor/Outdoor
- Tool-less installation (drill 3/8” hole to insert cable)
- Built-in pulling eye
- Reduces installation costs
- Eliminates in-field splicing
- Easily installed
- RoHS and REACH materials compliant
